Sports FAQ
Home / Badminton

Racket problem

啦Sasa2010-02-13 09:01:57 +0000 #1
I bought a racket

owner said he could pull 30 pounds

1 when the shooting began buying when the flat top of

21 lbs

I just pull the top of the film dragged round the

my beat is a titanium alloy

Is this normal do
stevelml2010-02-13 09:04:50 +0000 #2
not normal, 21-pound racket not deformed, not to mention and high-hardness titanium alloy. First of all suspected racket true and false, and then pull the master suspected of technology.

25 more than you usually have to pull to see significant deformation, but not necessarily. Because the racket is because of the high tension deformation, pull the master of technology is crucial. Technology has raised a good teacher is almost pounds deformation does not occur, and you see the national team have pulled 35 pounds, and no one beat is deformed.

Racket Pull lines are separated if they had pulled, and some pull tension of the master would recommend if they had inconsistencies pull shot methods (such as common if they had a difference of a pound of pull tension shoot method), but if they had to be basically balanced tension. If the cable tension if they had imbalanced racket deformation occurs. By the same token: the high-pound racket should immediately cut the line after the break, otherwise, the line tension imbalance, severe distortion even when the racket would break beat. Pull will also affect the accuracy of machine pull quality. The poor quality of the line pull machine pull tension is uneven, it is easy to damage the racket.

Hope my answer help to you.
hxm06032010-02-13 09:43:42 +0000 #3
very normal!

If he said that I can pull 30 pounds, then at least be able to pull a 25-26 pound ... ...

But, you sure do is pull it deformed?

Is not being knocked it?

Because that the boss can not boast such a big blow ah

21 pounds on the deformation added to啦30 ... ...
xianhaocan2010-02-13 09:29:32 +0000 #4
first time I saw ...

estimate is simulation ...



Other posts in this category