Sports FAQ
Home / golf

Golf belong to any Material

swj1862010-02-14 07:25:13 +0000 #1
Hello, everyone: Will the golf part of what the material synthesis, it simply is what material to do, thank you!
4018907lys2010-02-14 07:31:45 +0000 #2
golf equipment material

golf club is mainly due to advances in design technology of advanced materials for application development. Recently new synthetic composite materials and metals in the ball with the prevalent use.

1, carbon materials: mainly used to produce carbon shaft.

Generally in the graphite added the ceramic composition, or by adding carbon and glass fiber and so on, to make it lighter and stronger;

2, titanium alloys: general used in the manufacture DRIVER head.

Ti density is quite small, about 60% of iron. However, high strength, easy high-temperature heat treatment, can be welding, forging and other features can be. Titanium alloy is added the other metals, in order to improve his character. 4.42 Fe 7.86

6 - 4 Titanium: It is in the pure titanium have added 6% aluminum, 4% alum ---- used for casting head

β titanium (in the usual sense) --- in a pure titanium have added 15% alumina, 3% chromium, 3% aluminum, 3% nickel, multi-purpose forging head;

SP700 with the above-mentioned 15-3-3-3β titanium performance is similar to belong to the same high-quality β titanium.

3, W: tungsten density is quite large, about 4.5 times that of titanium, used for head weight. (Tungsten 19.5)

4, mild steel: soft iron. In the cast iron, the stainless steel have added 2-4% of the carbon so that they are very hard;

forging, adding 0.1-0.3% of carbon, can be softened ;

5, stainless steel: Stainless steel
---- sus630 (adding 17% chromium and 4% nickel) --- used for casting, the earlier well-known for the PING back empty-style cast iron, and now widely used in the irons and woods.
---- sus304 (adding 18% chromium and 8% nickel), which is more than sus630 soft.

6, other materials:

Beryllium Copper: (Cu-ri + 1% - 2.5% of beryllium), than stainless steel and weighs about 6-7% ---- used for manufacture of wedge.

Aluminum: (Al + 4% -6% 2% -3% of lead and magnesium), lighter, more durable and easy to process, but also used in the manufacture DRIVER head.

7, putting material: stainless steel, brass, bronze, copper, polymers, polyurethane, aluminum, stainless steel

Reply

Name:
Content:


Other posts in this category