Sports FAQ
Home / golf

Linhai Co., Ltd. in a golf club length of the standard requirements of the

Fire Eye jiao2010-02-14 20:10:55 +0000 #1

Blue Lightning2010-02-14 20:26:29 +0000 #2
Golf clubs are categorized by function:

(1) Woods

Wood is mainly used for kick-off if we can use it on the first shot hit the ball very far, with minimal score on the kick down a hole no doubt taken a decisive first step. Of course, the first pole on a "one hole" (HOle in One), that is, wooden kick-off credit limit.

Wood is characterized by shaft length, head relatively light, which led to easy to swing. Modern driver (Driver) although has been called a wood, in fact more than 70 percent of the drivers has been made of metal. Golf community with special emphasis on the traditional "conservative" Some players still using persimmon wood wood, but the assembly of the steel head will affect the ball is satisfactory. Goose neck with a rod-shaped head of the ball can give players a greater self-confidence in general. Drivers are usually 10 cm long.

Wood is divided into four kinds, namely, l-wood (Driver), 3-wood (Spoon). No. 4 wood (Buffy), 5-wood (Cleek). Smaller numbers. The longer shaft length, weight, the more light; the contrary, the number the greater the shorter the shaft length, weight, the more weight. Wooden case, iron no different. l-wood is a long clubs, swing when playing in the grass on the slide in the past.

Wood club head from a structural point of view, different designs have different characteristics and performance. In general, it is for hitting distance and the structure of considerable influence. Root surface and the rear head is greater than the length of the root of the length of the front-end and rod can be played fly ball, often get the expected direction and selection of the ideal placement of the ball.

(2) Irons

iron is actually stainless steel rod, or forging, or casting made of made of. Excellent golfers like to use handmade club face. Casting made in the outer edge of the increased iron have a greater sweet spot (Sweetspot). Most die-hard stainless steel shaft has a different shaft flexibility. Iron is usually the length of 95 centimeters.

The feature is easy to maintain iron shot of the directional thrust of the campaign is to use golf shot hit the ball close to goal, thus ensuring the maximum direction, so hit the ball even before they achieve the target goal is at least close to the primary目的. Iron ball with a soft iron parts manufacturing, and its bottom is smaller than the wood at the bottom, but also not as thick woods short length. As the weight of heavy iron, so swing, such as mowing, swing angle better, easier to set off the turf.

Iron a total of 9 species, including from 3 iron to 9 iron, as well as the seven kinds of Wedge (Piching Wedge), sand wedge (Sand Wedgr). In fact there is a special multi-functional iron. As the pitching wedge, sand wedge and the use of bar in the swing when they do not need to make the full large amplitude movements, and therefore these irons have only third-class the importance of flexible shaft. They are generally much shorter length, about 90 cm.

All 14 clubs as a set of clubs, that is four meters, the KCRC a push; whichever is the half-odd sets of clubs (Half Set). Prevalence of iron 30s of this century, manufacturers in order to expand market outlets, have unconventional introduction of different weights in iron, coupled with the shaft length and flexibility are different, so that buyers dazzled with a variety of clubs and I do not know of from the . Manufacturers also rack their brains for research and development of different ball position, different treacherous terrain and obstacles in case of a special iron. That time, some players even back 20 or more of the club running on the pitch. January 1, 1938, the United States Golf Association announced that: a set of clubs is the maximum combination of 14 clubs, may not exceed. Royal & Ancient Golf Club in Scotland a year later, also responded to determine the club to play a maximum of 14.

(3) Putter

putting green towards a hole is used to push the ball the direction of a special club. Putter and irons in the specification is somewhat different: In general, the putter shaft is shorter, Loft's largest no more than 5 degrees. In addition, the push to fight strange shapes and materials, what what kind of good, depending on whether the players to use smoothly, but more importantly is to look at results, that is, high or low success rate of putt. Third, selection of golf clubs

Gongyushanjishi, must first sharpen his tools.

Playing golf this matter, the first weapon is the club. However, this does not mean that what brand famous, which pole the most expensive, or pole which is the big names use, you purchase it. Choose the wrong step in chess club, you not only help improve the skills, lower handicap, but also a waste of money, the effect perceptibly more losses than gains.

I wish you a happy - ○ ( ̄ 0  ̄) ○

If you think a good request to adopt the best answer, thank you !^_^
zhangzhihuan122010-02-14 20:21:55 +0000 #3
golf clubs are categorized by function:

(a) Wood Rod

Wood is mainly used for kick-off, if using it on the first shot hit the ball very far, with minimal score on the kick down a hole no doubt taken a decisive first step. Of course, the first pole on a "one hole" (HOle in One), that is, wooden kick-off credit limit.

Wood is characterized by shaft length, head relatively light, which led to easy to swing. Modern driver (Driver) although has been called a wood, in fact more than 70 percent of the drivers has been made of metal. Golf community with special emphasis on the traditional "conservative" Some players still using persimmon wood wood, but the assembly of the steel head will affect the ball is satisfactory. Goose neck with a rod-shaped head of the ball can give players a greater self-confidence in general. Drivers are usually 10 cm long.

Wood is divided into four kinds, namely, l-wood (Driver), 3-wood (Spoon). No. 4 wood (Buffy), 5-wood (Cleek). Smaller numbers. The longer shaft length, weight, the more light; the contrary, the number the greater the shorter the shaft length, weight, the more weight. Wooden case, iron no different. l-wood is a long clubs, swing when playing in the grass on the slide in the past.

Wood club head from a structural point of view, different designs have different characteristics and performance. In general, it is for hitting distance and the structure of considerable influence. Root surface and the rear head is greater than the length of the root of the length of the front-end and rod can be played fly ball, often get the expected direction and selection of the ideal placement of the ball.

(2) Irons

iron is actually stainless steel rod, or forging, or casting made of made of. Excellent golfers like to use handmade club face. Casting made in the outer edge of the increased iron have a greater sweet spot (Sweetspot). Most die-hard stainless steel shaft has a different shaft flexibility. Iron is usually the length of 95 centimeters.

The feature is easy to maintain iron shot of the directional thrust of the campaign is to use golf shot hit the ball close to goal, thus ensuring the maximum direction, so hit the ball even before they achieve the target goal is at least close to the primary目的. Iron ball with a soft iron parts manufacturing, and its bottom is smaller than the wood at the bottom, but also not as thick woods short length. As the weight of heavy iron, so swing, such as mowing, swing angle better, easier to set off the turf.

Iron a total of 9 species, including from 3 iron to 9 iron, as well as the seven kinds of Wedge (Piching Wedge), sand wedge (Sand Wedgr). In fact there is a special multi-functional iron. As the pitching wedge, sand wedge and the use of bar in the swing when they do not need to make the full large amplitude movements, and therefore these irons have only third-class the importance of flexible shaft. They are generally much shorter length, about 90 cm.

All 14 clubs as a set of clubs, that is four meters, the KCRC a push; whichever is the half-odd sets of clubs (Half Set). Prevalence of iron 30s of this century, manufacturers in order to expand market outlets, have unconventional introduction of different weights in iron, coupled with the shaft length and flexibility are different, so that buyers dazzled with a variety of clubs and I do not know of from the . Manufacturers also rack their brains for research and development of different ball position, different treacherous terrain and obstacles in case of a special iron. That time, some players even back 20 or more of the club running on the pitch. January 1, 1938, the United States Golf Association announced that: a set of clubs is the maximum combination of 14 clubs, may not exceed. Royal & Ancient Golf Club in Scotland a year later, also responded to determine the club to play a maximum of 14.

Reply

Name:
Content:


Other posts in this category