Sports FAQ
Home / Racing

The most speed throttle and brake to drift? Reality

real fire K2010-04-24 17:10:02 +0000 #1
speed demand
melancholy prince ADAM2010-04-24 17:15:54 +0000 #2
hit the brakes and using body weight transfer, so that throws out the rear cornering method (for FR rear-wheel drive vehicles for more than 90 degree bend angle). Procedures are as follows:

1. Your entrance when the heavy foot on the brake and downshift for vehicles center of gravity forward.

2. Meng throw cut the steering wheel to the rear. 3. Against the wheel to the amendments to the angle into the corner. 4. To maintain the speed to glide to be the bending angle. 5. With the steering wheel, and instantly re-step on the gas out of turn.

Sidebreak-Drift: handle brake to throw the rear cornering method (for FF front-wheel drive vehicles, the overwhelming majority cars FF). Procedures are as follows:

1. Not to the general your entrance point, the early cut the steering wheel, brake handle and the vehicle skid.

2. Taxiing down immediately file, and keep sliding state to the cornering apex. 3. Get bent peak, that is Bigfoot throttle the bend.

4WD-Drift: a little four-wheel slide during cornering cornering tail flick method. Procedures are as follows:

1. Into the corners before accelerating into the corners when the corner vertex aligned, the steering wheel and brake force cut down file.

2. Slightly Sstraight-Drift car sliding into the corner way. 3. Cornering peak, the big feet straight out of the throttle curve.
Just Seamless Xiangxi2010-04-24 17:48:20 +0000 #3
If your car is rear-wheel drive, then the simple

a turn to the left a little direction, and then play the the right direction, followed pedal to the metal on it! ! !

But to pay attention to safety Oh! -----

Reply

Name:
Content:


Other posts in this category